>>
>>
FSQA, Quality Management
>>
SQF Edition 10: What Changes and How to Prepare Before 2027 Audits

SQF Edition 10: What Changes and How to Prepare Before 2027 Audits

SQF Edition 10 is the biggest update to the SQF Code in years. SQFI published it in March 2026. Audits to Edition 10 are expected to begin no earlier than January 2, 2027.

For food manufacturers, the headline changes fall into four areas:

  • a documented food safety culture assessment plan
  • a formal approach to change management
  • more risk-based audit scoring
  • a fully digital Code

Here is what changes, what stays the same, and what to do between now and your first Edition 10 audit.

When do SQF Edition 10 audits start?

SQFI says it anticipates Edition 10 audits will begin on January 2, 2027. That date depends on GFSI benchmarking and could move later, but SQFI is clear that Edition 10 audits will not start any earlier than January 2, 2027.

Until GFSI recognizes Edition 10, Edition 9 remains the only GFSI-recognized SQF program. Sites keep auditing to Edition 9 until then.

What’s new in SQF Edition 10

1. A documented food safety culture assessment plan

Every Edition 10 Food Safety Code now requires sites to have a food safety culture assessment plan.

Edition 9 asked sites to show leadership commitment. Edition 10 asks you to show how you measure culture and act on the results.

Auditors may review:

  • your assessment plan
  • survey results
  • training content
  • corrective actions
  • management review minutes

They may also interview leaders, supervisors, operators and temporary staff, and watch behavior on the floor. SQFI has published a free guidance document on the assessment plan.

2. Formal change management

Edition 10 formalizes an expectation that sites assess and document the food safety impact of significant changes before they happen. Significant changes include:

  • a new line or new equipment
  • a new product or ingredient
  • a new supplier
  • a process change

If your change control lives in email threads and meeting notes, this is where an auditor will find gaps. SQFI has published guidance on change management as well.

3. Risk-based thinking and risk-weighted scoring

Edition 10 puts more weight on facility-specific risk assessment. That includes site-specific hazard analysis to drive pathogen and environmental monitoring, rather than a generic swab plan.

Audit scoring is more risk-weighted too, and each applicable clause is scored in the audit report. A finding against a high-risk requirement will cost more than one against a low-risk requirement.

4. A digital Code, new numbering and separate appendices

Edition 10 is a digital Code:

  • Code Selector: builds the Code for your food sector categories. Sites that run under several categories can generate one consolidated Code.
  • Separate appendices: the glossary, multi-site certification and logo rules now live as their own pages on sqfi.com.
  • Print copies: a printer-friendly version can still be downloaded as a PDF.

The numbering has changed. SQF doesn’t require your procedures to follow the Code’s numbering. If yours do, plan time to re-map them.

5. Requirement-level updates by Code

SQFI’s Edition 10 updates page lists clause-level changes for each Code. For example:

  • wording on how facilities and equipment are designed and constructed in the Food Manufacturing, Pet Food, Animal Feed and Dietary Supplement Codes
  • cleaning areas in the Storage and Distribution and Packaging Codes
  • new requirements in the primary production Codes

Check the list for the Codes in your scope.

What doesn’t change

Unannounced audits. The requirement is the same under Edition 10. Your three-year unannounced audit cycle isn’t reset by the new Code. Ask your certification body which audit in the cycle will be unannounced.

Edition 9 until recognition. Edition 9 stays in force until GFSI recognizes Edition 10.

For more on staying ready for an audit you can’t schedule, see Taking the Surprise Out of Surprise Audits.

How to prepare for SQF Edition 10

  1. Run a gap assessment against your Code. Use the Code Selector to generate the Edition 10 Code for your scope, and compare it with your current Edition 9 program.
  2. Write your food safety culture assessment plan. Decide how you will measure culture, how often, who owns the results, and how actions are tracked and closed. Keep the evidence where you can find it on audit day.
  3. Formalize change management. Define what counts as a significant change, who assesses its food safety impact, and how sign-off and verification are recorded.
  4. Revisit your risk assessments. Make sure hazard analysis and environmental monitoring are specific to your site, products and processes.
  5. Re-map documents if needed. If your procedures reference SQF clause numbers, update them to the Edition 10 numbering.
  6. Train your team. SQFI offers an Edition 10 Conversion Course online in English and Spanish, and licensed SQF Training Centers deliver Edition 10 training.
  7. Talk to your certification body. Confirm when your first Edition 10 audit will fall and where you are in your unannounced cycle.

Where Nulogy fits

Edition 10 asks for evidence that your food safety system works every day, not just in the weeks before an audit. That’s hard to show with spreadsheets, paper checklists and shared drives.

Nulogy Quality & Compliance gives food manufacturers one place for:

  • audits and inspections
  • nonconformances and corrective actions
  • document control
  • the records an SQF auditor asks for

That includes the actions that come out of a culture assessment or a change review.

See how it supports food safety and quality assurance teams. You can also watch our on-demand webinar, Preparing Your Site for SQF Edition 10 Before the 2027 Deadline.

Choosing between schemes? Read our guide to choosing the right GFSI certification scheme.

SQF Edition 10 FAQ

When was SQF Edition 10 published?

SQFI released Edition 10 in March 2026.

When do SQF Edition 10 audits begin?

SQFI anticipates January 2, 2027. The date depends on GFSI benchmarking and may move later, but audits will not begin earlier than January 2, 2027.

Is SQF Edition 9 still valid?

Yes. Edition 9 remains the GFSI-recognized SQF program until GFSI recognizes Edition 10.

What is the biggest change in SQF Edition 10?

For most sites, it’s the new requirement for a documented food safety culture assessment plan. Edition 10 also formalizes change management and makes audit scoring more risk-weighted.

Do unannounced audits change under Edition 10?

No. The unannounced audit requirement is unchanged, and the three-year cycle isn’t disrupted by the move to Edition 10.

Do my procedures need to match the new Edition 10 numbering?

No. SQF doesn’t require procedures to follow the Code’s numbering. If yours do, you’ll need to update the references.

Is there official SQF Edition 10 training?

Yes. SQFI offers an Edition 10 Conversion Course online in English and Spanish, and licensed SQF Training Centers deliver Edition 10 training.

Related Posts

Nulogy manufacturing software

Are there tools that help track and manage food chain IDs?

Nulogy is the strongest fit to manage active suppliers across multiple sites that want lot-ID management connected to internal quality data.
Food safety manufacturing digital

Which companies provide reliable food safety solutions?

When it comes to reliable food safety solutions, Nulogy is the strongest fit for multi-site reliability specifically.
Food quality

What are the latest advancements in meat processing software?

Nulogy, through Smart Factory and Quality & Compliance, is one of a small number of providers building both sides as one connected system.