>>
>>
Manufacturing Excellence, Manufacturing Explained
>>
A Plant Manager’s Guide for Daily Production Meetings

A Plant Manager’s Guide for Daily Production Meetings

Daily Production Meeting Types

A daily production meeting can transform a manufacturing organization. Production meetings provide an overview of the factory floor and the figurative fires that need immediate attention. “Essentially, the morning meeting embodies open communication and dialogue to keep people engaged,” Nick Hinman, VP of Corporate Strategy at Tacony, says. “If you stay connected at the right level, the right goals are established, and the right tracking is in place, the rest will follow.”

These 10-15 minute conversations create calm and flow by making actionable decisions based on data. Operators alerts management about issues that need additional attention. Plant managers and supervisors send back plans along with metrics to gauge success.

The basic structure of a daily production meeting addresses three questions:

  • How did we do yesterday?
  • What do we have to do today to improve from yesterday?
  • Is there anything we need to talk about of importance or that we need to accomplish as a team?

This blog post will break down strategies for how to conduct production meetings on the factory floor with operators, in the conference room with supervisors, and across the organization with the production management team.

What is a Daily Production Meeting?

The best-run manufacturing companies have daily production meetings. These quick, 10-15 minute meetings are designed to provide an overview of progress and keep everyone aware and engaged of what’s happening in the plant.

The purpose is to make these quick, not taking up too much time as these are non-value-add activities (yet, they still provide so much value to the organization) while providing a snapshot of what’s happening.

  • What went right?
  • What went wrong?
  • What are we going to do about it?

Tier I Meetings – Factory Floor

This meeting is a usually part of the daily shift hand-off between operators and their leads. It’s an opportunity to celebrate wins and address losses. For example, if operators notice an uptick in scrap rates, they can highlight the issue. Leads will use these observations to help determine what happened and what needs to be done to correct the issue. Real-time data can further enhance this decision making process.

One of the main concerns tackled at these meetings is how actual production is measuring up to planned production. Operators can make initial recommendations to bring numbers back into alignment. Supervisors can also look at dashboard data from a production monitoring system. Drops in throughput can be attributed to a single source or trend.

Three key questions to ask that will hold the team accountable are:

  1. Who’s escalating it?
  2. Who’s solving it?
  3. Who’s checking that it actually happened?

The most important aspect of a Tier I meeting is that leads should be listening more than talking. Your operators are the first line of defense for the factory floor and will speak up if they know a manager will listen.

Tier II Meetings – Conference Room

Leads will communicate with their supervisors about issues or trends they are noticing on the factory floor. Common talking points can include production schedules, bottleneck issues and capacity management. A conference room is a popular location for this type of meeting since many manufacturing organizations still rely on displaying their production counts on white boards. This meeting can be held anywhere as long as the decision makers have access to data. Organizations that have switched over to a production monitoring system like Nulogy Smart Factory can view counts on a dashboard using a tablet, laptop or mounted display.

Support functions such as maintenance, scheduling, and IT will get involved at this level based on feedback from operators. This helps maintenance create a plan for the day to address high priority needs first. For example, machines that are creating bottlenecks when they go down may receive a high priority, but preventative maintenance for a high volume machine will still need to go on the schedule.

Tier III Meetings – Across the Organization

Supervisors will elevate issues to plant managers and other upper levels of management within the organization. Consistently falling short on throughput or other KPIs need to be addressed to find the source of the problem. Plant managers will create a plan or timeline to address issues. Supervisors will communicate this plan back to leads at the next Tier II meeting. If a plant manager already has access to a production monitoring system, they may always be aware of these issues from mobile or email alerts. Ideally, this meeting focuses on the plant’s performance at the end of every week and if goals were met or not. If a goal was missed, a plan of action is determined to ensure goals are met the next week.

Who Should Attend?

Like we mentioned above, meetings can take a tiered approach, including different people at the different levels, but everyone in the plant must be involved in at least 1 of these daily meetings, even maintenance. Meetings should be cross-functional.

“First off, maintenance needs to be in that meeting. You wouldn’t believe how many times maintenance isn’t in the production meetings. That’s not good. They need representation there because that’s where you should be escalating things,” Stuart Fergusson, Director of Solutions Engineering at Fiix CMMS Software says.

Everyone in the plant is important and needs to be included. Without input and communication from all teams, daily meetings would not be as comprehensive or inclusive.

What Data Should You Be Looking At?

An agenda with standard work should provide structure to the daily meetings. This will help to determine key KPIs without going too far into the weeds.

“During these meetings, we highlight quality issues we ran into, miss picks on the lines, customer services issues, scrap from engineering, backorders, and overall efficiency, basically all the key KPIs we track daily.

This creates awareness among the team so everyone knows where we are for the week, where we need to go, and what we need to concentrate on. We also share quick wins and if we weren’t successful in meeting KPI goals, we discuss how to do better,” Nick Hinman says.

Jesse DePriest, a Lean Transformation Coach and Director of Operational Excellence at First National Bank of Omaha, explains why defining and measuring the process is important, “Define the process. Decide how to measure that. State that challenge in measurable terms for what excellence would be. Now we can go about the business of framing the problem and target setting and obstacles for that.”

Where Do You Hold the Meeting?

Because these meetings are quick and to the point, there’s no reason to meet in a formal meeting room. Instead, hold the meeting on the plant floor or break room so progress can be reviewed and next steps can be outlined, and after, everyone begins their day.

Truthfully, there’s no wrong place to hold the meeting. Determine what is going to work for your plant. Most importantly, hold a daily production meeting and don’t worry about the location.

Tracking Action Items from the Daily Production Meeting

You’ve held a daily meeting, outlined areas for improvement, recognized big wins, and encouraged employees, so what’s next? You need to create a structure for ensuring tasks are completed and tracked.

How do you track these action items?

“As an enterprise, we should understand what our strategy is, and where we’re going, how would we do that and how do we know we’re achieving it?” Jesse DePriest explains.

Most often, tracking is very simple and done with whiteboards or a set of cards, maybe a Kanban system. That’s really it. There are so many processes that can be involved in tracking action items from the daily production meeting that simple cards are the best solution.

As a productivity software solution, we’ve even debated adding in daily production meeting tracking capabilities, but in surveying our customer base, they don’t want or need it. Every task is just a little bit different and if you were to track that in a system, it would get too complex, too quickly.

If the tracking system is really simple, it’s on a card moving through the processes, and it’s reviewed through the daily production meetings to make sure it’s getting done, there is not much more you need to do from a tracking perspective.

Many people think you need to digitize these systems, but as we’ve proven, that is simply not the case. A simple solution will prove to be most effective.

Daily Production Meeting Takeaways

A daily production meeting is vital to the success of a manufacturing company. The main goal of a Plant Manager is to be proactive, give their team the data they need to solve problems and stop racing from one fire to the next. Production meetings are an opportunity to address problems, get input from operators on the floor, and recognize wins throughout the organization. Coaching and mentoring from good leaders will help to ensure the right behaviors and habits take root.

Related reading

Related Posts

Manufacturing Downtime

Built for CNC or built for your whole line? How to evaluate machine-monitoring software fit

Understand how to choose the right machine monitoring software fit for your production needs to enhance efficiency and visibility.
Nulogy Smart Factory dashboard TV monitor

Visual scoreboards vs. AI-assisted production monitoring: what’s actually different

Explore visual scoreboards vs AI production monitoring and discover which approach better enhances manufacturing efficiency.
Manufacturing line tablet collaboration managers

The hidden cost of monitoring software that outgrows your plant, not the other way around

Explore production monitoring software that scales efficiently for multiple lines and sites, reducing integration costs.